Why the Private Label Carton Quote Looks Cheap Until It Lands
Two buyers ordered the same stones and Material in the same month. One paid 9% less and absorbed 23 rejects out of 200 pieces; the other paid our quote and shipped clean. The difference was sieve drift, and it was measurable on both benches, with GRA report and private-label carton with hangtag stated on the same sheet.
The defect did not surprise us. Sieve drift is the predictable output of a run where nobody wrote the tolerance down, and it is the first measurement we take on an incoming stones and Material, on a 200-piece Private Label Carton order at USD 3-114.
We did not discount the quote. We changed the gauge, the seat cut, the plating log and the tray rule, and the second run shipped with zero rejects on size distribution within the declared sieve and zero girdle chips on arrival, with GRA report and private-label carton with hangtag stated on the same sheet, quoted at USD 3-114 per piece in private-label carton with hangtag.
The Measurements Behind a USD 3-114 Quote
Price is the first thing compared and the last thing that matters. These four measurements decide the return rate on stones and Materials, and three of them cost nothing to specify, priced at USD 3-114 for the 200-piece Private Label Carton run.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Stone colour consistency | Graded by eye under D65 | Colour matched to a retained master stone, per tray | Repeat colour complaint in the same SKU |
| Sizing drift across the run | Not measured | Go/no-go gauge on every size, drift held under 0.15 mm | Resize queue and reship cost |
| Clasp spring life | Sampled by hand | Cycled 500 times on a jig per lot | Detach claim and brand damage |
| Prong tension and seat depth | Checked by feel at the bench | Pull-tested per piece, seat depth written on the sheet | Stone loss and total replacement |
Each line is a gauge, not a slogan. A supplier who cannot quote a number for sieve drift is quoting an opinion about stones and Materials, and the Private Label Carton quote for it sits at USD 3-114.
Private Label Packaging for stones and Materials
Private label changes four things and none of them is the piece: the stamp, the hangtag, the box and the barcode. Get those four aligned before the first bulk run or the carton arrives with your name spelled two ways, which the Private Label Carton file records at USD 3-114 in private-label carton with hangtag.
The stamp goes inside the shank or on the clasp tag, and it has to be small enough not to break the surface on a thin stones and Material. Below 0.8 mm of shank width we recommend the hangtag only, which the Private Label Carton file records at USD 3-114 in private-label carton with hangtag.
Cartons are quoted at 200 pieces with the label printed, not stickered, because a sticker on a matte box reads as a repack. Lead time adds three days for the print run, which is why private label starts later than stock, the figure being USD 3-114 for a 200-piece run.
What a USD 3-114 Quote Hides
The Private Label Carton price of 200 pieces splits as below. The line buyers challenge is labor, and it is the line that decides the second season, priced at USD 3-114 for the 200-piece Private Label Carton run.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for stones and Materials | 34% | Alloy choice and casting yield |
| Stone or melee for stones and Materials | 25% | Sieve range and lot batching |
| Setting and finishing labor for stones and Materials | 22% | Jig design and bench minutes |
| Plating, polish and QC for stones and Materials | 15% | Per-tray versus per-piece checks |
| Packaging for stones and Materials | 4% | private-label carton with hangtag |
Break the USD 3-114 quote into these five lines and the comparison stops being rhetorical.
What Fails First on stones and Materials
girdle damage
Stones packed loose in a bag chip each other in transit. Individually wrapped parcels cost more and arrive usable, and the Private Label Carton quote for it sits at USD 3-114.
Our countermeasure is a gauge and a written limit. It adds about 6 seconds per piece and removes the defect from the run rather than from the carton, with GRA report and private-label carton with hangtag stated on the same sheet.
sieve drift
A parcel sold as 2.0-2.2 mm with 15% of stones at 1.9 mm changes the setting labor on the buyer's bench. Sieve the parcel, do not sample it, quoted at USD 3-114 per piece in private-label carton with hangtag.
In a 200-piece run this typically shows on 8 of pieces. Catching it means measuring size distribution within the declared sieve at the tray level, not inspecting the finished carton, and the Private Label Carton quote for it sits at USD 3-114.
mixed color lots
Mixing near-colorless and G-H stones in one parcel produces a finished piece with a visible tonal step. Parcels ship by single lot, certified GRA report and packed private-label carton with hangtag at 200 pieces.
The commercial effect is replacement stones plus a sorting delay on the buyer's line. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, certified GRA report and packed private-label carton with hangtag at 200 pieces.
MOQ, Samples and the Balance
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 200-piece Private Label Carton order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, with GRA report and private-label carton with hangtag stated on the same sheet.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 3-114 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the private-label carton with hangtag format at 200 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, which the Private Label Carton file records at USD 3-114 in private-label carton with hangtag.
Certification is GRA report for the lots that carry it, with a batch report and per-piece measurement of size distribution within the declared sieve for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, certified GRA report and packed private-label carton with hangtag at 200 pieces.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, and at USD 3-114 for 200 pieces that is the number the buyer signs.
AQL, Tray Checks and What a QC Report Should Say
In US e-commerce, this is the single most negotiated line on stones and Materials and the least documented one, shipped as private-label carton with hangtag and certified GRA report.
The commercial version of this question for stones and Materials is simple: what does a failure cost the buyer, and who pays it. In our terms the answer is a replacement inside the same order cycle, with the retained reference tray as the arbiter, the figure being USD 3-114 for a 200-piece run.
That clause matters more than a discount on stones and Materials. A 4% lower unit price disappears on the first rejected tray; a written responsibility clause does not, certified GRA report and packed private-label carton with hangtag at 200 pieces.
Carton Cube, Duty and the Freight Line That Surprises Buyers
Nobody quotes it for stones and Materials until something goes wrong, which is exactly why it belongs in the first email, which is how the Private Label Carton account reads it at USD 3-114.
We run this check per tray rather than per carton because the defect that matters on stones and Materials is the one that repeats. A single odd piece is noise; a pattern across one tray is a process problem and it will be in every tray made after it, which the Private Label Carton file records at USD 3-114 in private-label carton with hangtag.
The report the buyer receives states the count per tray, the measured average and the outlier count for stones and Materials. It is deliberately unglamorous, and it is the document that settles most disputes before they start, priced at USD 3-114 for the 200-piece Private Label Carton run.
From Spec to private-label carton with hangtag
On 200 pieces of stones and Materials the calendar starts at the signed spec, not at the deposit, and it ends with private-label carton with hangtag on a pallet, on a 200-piece Private Label Carton order at USD 3-114.
- Agree the stamp position, the hangtag copy and the box print before the first carton.
- Print the cartons and hangtags in one run: a sticker on a matte box reads as a repack.
- Set the barcode and the FNSKU mapping for every SKU before the label file is approved.
- Build the first carton at the quoted quantity so the pack-out is proven, not assumed.
- Hold a retained carton as the pack reference for every reorder.
A 50-piece first order at USD 3-114 is a measurement of size distribution within the declared sieve, not a commitment to the range.
A 200-Piece Test Run
A test run at 50 pieces tells you three things: whether sieve drift is controlled, whether packing survives freight, and whether the count is honest, and at USD 3-114 for 200 pieces that is the number the buyer signs.
Put the reject rule in writing before the deposit. The Private Label Carton conversation after arrival is shorter when the rule is already on the order, the figure being USD 3-114 for a 200-piece run.
The Dock Check on stones and Materials
Air lands in 5-8 days to the US west coast and sea takes three times the transit. At USD 3-114 per piece the choice is a cash-flow decision.
DDP is available for US accounts that want duty and clearance on our side, and it removes the invoice that arrives after the carton clears, the figure being USD 3-114 for a 200-piece run.
On arrival, weigh a tray and measure ten pieces. Anything outside the band is a claim with evidence rather than a difference of opinion, shipped as private-label carton with hangtag and certified GRA report, which is USD 3-114 on the Private Label Carton schedule.
Frequently Asked Questions
What is the minimum order for stones and Materials?
50 pieces per stones and Material. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, certified GRA report and packed private-label carton with hangtag at 200 pieces.
Do you supply certificates for stones and Materials?
GRA report on stones and Materials above the threshold stated on the quote. Below it we supply a batch report plus per-piece measurement of size distribution within the declared sieve, which is what a counter or a listing actually needs, shipped as private-label carton with hangtag and certified GRA report.
How do you handle a rejected tray?
We replace or credit inside the same order cycle. The retained reference tray decides: if sieve drift shows on our retained piece we own it, and if it appeared in transit we split the assay cost and file with the carrier, and 200 pieces leaves Wuzhou in private-label carton with hangtag at USD 3-114.
What are the payment terms?
30 percent deposit with the order, 70 percent against the bill of lading. For accounts on a second order we quote 30/70 with a 15-day balance window once the first shipment has cleared, on a 200-piece Private Label Carton order at USD 3-114.
What is the minimum order for stones and Materials?
50 pieces per stones and Material. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, certified GRA report and packed private-label carton with hangtag at 200 pieces.
Next Step
Send a photo or a drawing of the piece you want in private-label carton with hangtag. We answer with a price, a calendar and the four measurements above, and the Private Label Carton quote for it sits at USD 3-114.
The factory behind stones and Materials here is Wuzhou HengliLai Jewelry Co., Ltd., operating since 2009 in Wuzhou, Guangxi, at roughly 60,000 pieces a month. Reach the export desk at service@holycome.com or +86 18078079070 on WhatsApp, the figure being USD 3-114 for a 200-piece run.
Related reading: Buying Guides Vermeil Upgrade: Sample to Container: The Real Calendar - HOLYCOME Buying Guides Valentine Program: The Reject Tray Policy That Decides a Partnership - HOLYCOME
