AQL, Tray Checks and What a QC Report Should Say in the Amazon FBA Ready Program
A US buyer of inside the Atelier came to us after 200 inside the Atelier from a trading company produced 11 rejects in the first inspection. The defect was not cosmetic: prong geometry had drifted far enough that the buyer's own bench could not correct it without recutting, which is USD 38-210 on the Amazon FBA Ready schedule.
At 200 pieces the buyer was not buying a defect, they were buying a document. The Amazon FBA Ready order carried a photo and a price, and prong geometry had nowhere to live, on a 200-piece Amazon FBA Ready order at USD 38-210.
Our rebuild kept the buyer's retail price and changed four numbers on the bench. The next run cleared inspection because the specification traveled with the tray, not with a phone call, priced at USD 38-210 for the 200-piece Amazon FBA Ready run.
Four Spec Lines a Amazon FBA Ready Buyer Checks
Most quotes describe the inside the Atelier and skip the part that determines the buyer's margin. Those four lines are listed below with the trade default beside our standard, and the Amazon FBA Ready quote for it sits at USD 38-210.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Stone colour consistency | Graded by eye under D65 | Colour matched to a retained master stone, per tray | Repeat colour complaint in the same SKU |
| Sizing drift across the run | Not measured | Go/no-go gauge on every size, drift held under 0.15 mm | Resize queue and reship cost |
| Clasp spring life | Sampled by hand | Cycled 500 times on a jig per lot | Detach claim and brand damage |
| Prong tension and seat depth | Checked by feel at the bench | Pull-tested per piece, seat depth written on the sheet | Stone loss and total replacement |
Write these four into the purchase order and the argument after delivery becomes arithmetic rather than recollection, and 200 pieces leaves Wuzhou in retail-ready box with FNSKU label at USD 38-210.
Cost Split on a Amazon FBA Ready Piece at USD 38-210
At USD 38-210 per piece for inside the Atelier, the stone is roughly a quarter and labor is where two quotes for the same drawing diverge.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for inside the Atelier | 32% | Alloy choice and casting yield |
| Stone or melee for inside the Atelier | 23% | Sieve range and lot batching |
| Setting and finishing labor for inside the Atelier | 21% | Jig design and bench minutes |
| Plating, polish and QC for inside the Atelier | 14% | Per-tray versus per-piece checks |
| Packaging for inside the Atelier | 10% | retail-ready box with FNSKU label |
The saving in the cheapest inside the Atelier quote hides in the plating line and the stone grade. Both appear in season two, not on arrival, which the Amazon FBA Ready file records at USD 38-210 in retail-ready box with FNSKU label.
Three Failures That Reach the Amazon FBA Ready Bench
prong geometry
A prong that grips the girdle instead of the pavilion survives the showroom and fails the third ultrasonic clean. The seat has to be cut to the pavilion angle before the prongs close, quoted at USD 38-210 per piece in retail-ready box with FNSKU label.
Our countermeasure is a gauge and a written limit. It adds about 22 seconds per piece and removes the defect from the run rather than from the carton, the figure being USD 38-210 for a 200-piece run.
rhodium burn-off
A 0.05 micron rhodium layer reads white in the tray and shows yellow at the shank in six months of daily wear. Thickness, not bath chemistry, is the variable that matters, and 200 pieces leaves Wuzhou in retail-ready box with FNSKU label at USD 38-210.
In a 200-piece run this typically shows on 14 of pieces. Catching it means measuring stone retention after a 40-cycle wear test at the tray level, not inspecting the finished carton, which the Amazon FBA Ready file records at USD 38-210 in retail-ready box with FNSKU label.
size-step drift
A run gauged at size 6 and estimated elsewhere ships a size 8 that measures 7.75. The mismatch shows up as a resize queue two weeks after launch, on a 200-piece Amazon FBA Ready order at USD 38-210.
The commercial effect is a return shipment plus a resize labor claim, typically USD 9-14 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, which is how the Amazon FBA Ready account reads it at USD 38-210.
Listing inside the Atelier on Amazon FBA Without a Takedown
Amazon treats jewellery as a category where the packaging is part of the compliance file, not an afterthought. A poly bag with an opening of five inches or more needs the suffocation warning printed on it, and every unit needs an FNSKU label that covers the manufacturer barcode rather than sits beside it, with GRA report and retail-ready box with FNSKU label stated on the same sheet.
For inside the Atelier the practical constraint is that a unit must survive a bin with other units and still read clean at unboxing. We pack each piece in a foam-backed pouch, then the retail box, then the FNSKU on the outside of the pouch, so a warehouse scan never touches the box the customer sees, which is USD 38-210 on the Amazon FBA Ready schedule.
Weight and dimension limits decide your freight per unit more than the piece cost does. A single inside the Atelier in its retail box normally lands under eight ounces, which keeps it in the small standard tier. Anything above that moves a tier and eats the margin you built into the USD 38-210 quote.
Terms Behind a Amazon FBA Ready Order
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 200-piece Amazon FBA Ready order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, priced at USD 38-210 for the 200-piece Amazon FBA Ready run.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 38-210 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the retail-ready box with FNSKU label format at 200 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, certified GRA report and packed retail-ready box with FNSKU label at 200 pieces.
Certification is GRA report for the lots that carry it, with a batch report and per-piece measurement of stone retention after a 40-cycle wear test for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, the figure being USD 38-210 for a 200-piece run.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, which is USD 38-210 on the Amazon FBA Ready schedule.
Alloy, Karat and the Cost of a Color Change
Buyers ask it in the first call about inside the Atelier and rarely get a number they can put in a spreadsheet, the figure being USD 38-210 for a 200-piece run.
At 200 pieces the arithmetic on inside the Atelier changes: the fixed costs spread, the variable costs do not. That is why the second order prices better than the first even when the gold fix has moved up, and 200 pieces leaves Wuzhou in retail-ready box with FNSKU label at USD 38-210.
We quote both a first-run price and a reorder price for inside the Atelier on the same sheet so the buyer can see where the curve flattens. Most flatten by the third run, and 200 pieces leaves Wuzhou in retail-ready box with FNSKU label at USD 38-210.
What a Report Proves and What It Does Not
The answer for inside the Atelier depends on four variables, and three of them are under the buyer's control, which is how the Amazon FBA Ready account reads it at USD 38-210.
Buyers who get this wrong on inside the Atelier usually get it wrong in the first order and correct it in the second. The cost of that correction is rarely the money; it is the four to six weeks of shelf time lost while a replacement run of inside the Atelier is scheduled behind other orders, and at USD 38-210 for 200 pieces that is the number the buyer signs.
Our approach is to write the rule into the inside the Atelier spec sheet before casting, then test it on the first tray. A rule that only exists in an email is not a rule, and a rule that is not tested is a hope, shipped as retail-ready box with FNSKU label and certified GRA report.
The Calendar Behind a Amazon FBA Ready Run
For retail-ready box with FNSKU label at 200 pieces, the sequence is fixed and the dates are the only thing that moves, and the Amazon FBA Ready quote for it sits at USD 38-210.
- Lock the spec: metal, stone size range, plating thickness, sizing band and finish, all written on one sheet.
- Pull a stock-component sample in 3-5 days and measure it against that sheet, not against the photo.
- Approve the sample in writing, including the reject rule and the retained reference tray.
- Run bulk in 15-20 days for orders under 500 pieces, with the gauge check independent of the shift.
- Ship from Guangzhou or Shenzhen with the QC sheet in the carton and the batch report by email.
MOQ stays at 50 pieces per design on inside the Atelier, low enough to test a shelf and high enough to keep the gauge check independent, certified GRA report and packed retail-ready box with FNSKU label at 200 pieces, which the Amazon FBA Ready file records at USD 38-210 in retail-ready box with FNSKU label.
The First Amazon FBA Ready Order
The point of a small first run is not the margin. It is finding out whether the supplier's paperwork survives contact with the actual goods, which is USD 38-210 on the Amazon FBA Ready schedule.
The first order is the cheapest inspection a buyer will ever run, because the volume is small enough to check every tray by hand, on a 200-piece Amazon FBA Ready order at USD 38-210.
Getting retail-ready box with FNSKU label to US wholesale
Export runs through Guangzhou or Shenzhen. For Amazon FBA Ready orders the GRA report file travels with the shipping documents, not separately, shipped as retail-ready box with FNSKU label and certified GRA report.
The clearance term matters more than the rate at 200 pieces. A duty surprise can cost more than the whole freight line, on a 200-piece Amazon FBA Ready order at USD 38-210.
The arrival check is three steps: count cartons against the packing list, weigh a sample tray, and measure ten pieces against stone retention after a 40-cycle wear test and prong tip height within +/-0.10 mm, and at USD 38-210 for 200 pieces that is the number the buyer signs.
Frequently Asked Questions
What is the minimum order for inside the Atelier?
50 pieces per inside the Atelier. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, shipped as retail-ready box with FNSKU label and certified GRA report.
Do you supply certificates for inside the Atelier?
GRA report on inside the Atelier above the threshold stated on the quote. Below it we supply a batch report plus per-piece measurement of stone retention after a 40-cycle wear test, which is what a counter or a listing actually needs, and the Amazon FBA Ready quote for it sits at USD 38-210.
How do you handle a rejected tray?
We replace or credit inside the same order cycle. The retained reference tray decides: if prong geometry shows on our retained piece we own it, and if it appeared in transit we split the assay cost and file with the carrier, with GRA report and retail-ready box with FNSKU label stated on the same sheet.
What are the payment terms?
30 percent deposit with the order, 70 percent against the bill of lading. For accounts on a second order we quote 30/70 with a 15-day balance window once the first shipment has cleared, with GRA report and retail-ready box with FNSKU label stated on the same sheet.
What is the minimum order for inside the Atelier?
50 pieces per inside the Atelier. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, shipped as retail-ready box with FNSKU label and certified GRA report.
Next Step
If the USD 38-210 band fits your shelf, send the drawing and we will quote the 200-piece Amazon FBA Ready run inside one business day.
HOLYCOME runs this line from Wuzhou, Guangxi, through Wuzhou HengliLai Jewelry Co., Ltd. Output is about 60,000 pieces a month across inside the Atelier and adjacent categories. service@holycome.com or WhatsApp +86 18078079070, shipped as retail-ready box with FNSKU label and certified GRA report.
Related reading: Inside the Atelier Shopify DTC: Carton Cube, Duty and the Freight Line That Surprises - HOLYCOME Inside the Atelier Private Label Carton: MOQ, Mixed Designs and the Real First Order - HOLYCOME
